Back

MultiScanner® HD900 OneStep™

FEATURES

FIND STUD CENTRE
FIND STUD EDGES
FIND WOOD OR METAL STUDS
SCAN THICKER WALLS
WIREWARNING® DETECTION
SCAN FOR METAL
LOCATE ELECTRICAL
LCD DISPLAY
LOW BATTERY INDICATOR

MultiScanner® HD900 OneStep™

MultiScanner® HD900 OneStep™ multifunction stud finder quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep,  and ferrous metal, such as rebar, up to 76 mm deep
  • AC Scan mode locates live, unshielded AC electrical wiring up to 51 mm deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Backlit LCD display with Target Spotlight indicates the direction and edge of the stud and illuminates when the centre of the stud is detected
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
  • Translucent base and illuminated “V” marker groove for more accurate marking of target location

MultiScanner® HD900 OneStep™ multifunction stud finder quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper…
Read More Read Less
Back To Top