StudSensor ™ A150 can locate the edges and centre of studs and joists. Equipped with a Signal Strength Indicator, the A150 helps determine whether the object detected is closer or further from the surface for more accurate mapping of the wall. The Low Battery Indicator alerts the user when the battery should be replaced. The SpotLite® Pointer, ultra-bright LCD screen, and audio tone indicate the location of the specified target.

• StudScan Mode locates the centre, edges, and direction of wood and metal studs up to 19 mm deep
• DeepScan® Mode doubles the scanning depth to locate the centre, edges, and direction of wood and metal studs up to 38 mm
• WireWarning® Detection indicates the presence of live, unshielded AC electrical wiring up to 50 mm deep in both stud scanning modes
• ACT™ (Auto Correcting Technology) automatically recalibrates the StudSensor™ when needed. ACT™ also corrects common errors, such as when scanning begins over a stud
• Low Battery Indicator alerts the user to replace the battery with a brand new battery with an extended expiration date for optimum performance
• Signal Strength Indicator helps to distinguish between shallow and deep targets
• SpotLite® Pointer shines an arrow-shaped light on the scanned surface to clearly indicate the location of the target
• Translucent base and illuminated “V” marker groove provides more accurate marking of target location
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle