Back

MultiScanner™ L550c OneStep™

FEATURES

FIND STUD CENTRE
FIND STUD EDGES
FIND WOOD OR METAL STUDS
SCAN THICKER WALLS
WIREWARNING® DETECTION
SCAN FOR METAL
LOCATE ELECTRICAL
LCD DISPLAY
LOW BATTERY INDICATOR
COLORTRIP™ DISPLAY

MultiScanner™ L550c OneStep™

The MultiScanner™ L550c OneStep™ vibrantly locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights red, to alert the presence of live AC in Stud, DeepScan™, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, patented SpotLite™ Pointer, and audio tone all indicate the location of the target.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan™ mode doubles the scanning depth to 38 mm deep
  • WireWarning™ Detection indicates the presence of live, unshielded AC electrical wiring up to 50 mm deep
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep, and ferrous metal, such as rebar, up to 75 mm deep
  • AC Scan mode locates live, unshielded AC electrical wiring up to 50 mm deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • ColorTrip™ display indicates the direction and edge of the stud and illuminates when the centre of the stud is detected
  • Low Battery Indicator for optimum performance
  • Signal Strength Indicator helps to distinguish between shallow and deep targets
  • SpotLite™ Pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
  • “V” marker groove for more accurate marking of target location
  • Rubber handle for non-slip grip

The MultiScanner™ L550c OneStep™ vibrantly locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights red, to alert the presence of live AC in Stud, DeepScan™, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, patented SpotLite™ Pointer, and audio tone all indicate the location of the target.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan™ mode doubles the scanning depth to 38 mm deep
  • WireWarning™ Detection indicates the presence of live, unshielded AC electrical wiring up to 50 mm deep
Read More Read Less
Back To Top