Featuring new, revolutionary Target Control™ (TC™) Level 1 Technology. The Zircon® SuperScan™ M3 advanced wall scanner is tuned to find clean, wood studs while filtering out metallic false positive objects, such as plumbing, conduit, straps, brackets, or ducts, hiding behind surfaces. The LoLevel™ Detector and MetalliWarning™ alert to the presence of dangerous, deep, less dense false positives, and metal targets, reducing the chance of accidentally drilling into a piece of metal or plastic pipe. With the addition of Metal Scan mode, users can interactively narrow and map metal in walls, making for a more robust and multifunctional tool.

The SuperScan™ M3 offers four distinct detection modes – TC™, StudScan, DeepScan™, and Metal Scan. A 3-mode switch makes it easy to toggle between functions, while the ColorTrip™ Display conveniently details information. The screen will illuminate pale blue in TC™ mode and indicate the centre, edges, and direction of wood studs, while enabling the user to identify ‘safe-to-drill’ zones by utilizing the new ‘Trust but Verify’ technique. When TC™ mode is off, the tool will perform in StudScan mode indicating both wood and metal studs. DeepScan™ mode doubles the scanning depth to find wood and metal studs beneath extra layers of drywall or paneling. A dedicated Metal Scan mode helps users detect ferrous metal, such as rebar, and non-ferrous metal, such as copper. The Target Spotlight illuminates on screen and the SpotLite™ Pointer shines on the surface being scanned when the target object is found.

• NEW! – Target Control™ (TC™) Mode locates the centre, edges, and direction of wood studs, and not metal, up to 19 mm deep behind surfaces. Identifies ‘safe-to-drill’ zones between adjacent drywall screws, nails, and protector plates
• StudScan Mode locates centre, edges, and direction of wood and metal studs up to 19 mm deep
• DeepScan™ Mode doubles the scan depth of wood and metal studs up to 38 mm deep
• Metal Scan Mode locates ferrous metal up to 75 mm deep and non-ferrous metal up to 38 mm deep
• WireWarning™ Detection alerts to live, unshielded AC wires up to 50 mm deep
• LoLevel™ Detector displays low (weak) signal objects, such as plastic water pipes, while in TC™ mode
• Signal Strength Indicator helps distinguish between shallow and deep targets while in StudScan and DeepScan™ modes
• MetalliWarning™ turns on when metal is detected in TC™, StudScan, and DeepScan™ modes
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
• Target Spotlight illuminates on screen when target is detected
• ColorTrip™ Display illuminates pale blue in TC™ mode, green in DeepScan™ mode, blue in Metal Scan mode, and red to alert to the presence of live AC electricity
• SpotLite™ Pointer shines an arrow-shaped light on the scanned surface to indicate the target location
• “V” marker groove enables accurate marking of target location
• Low Battery Indicator for optimum performance (9V battery required, not included)