Back

MultiScanner® HD900c OneStep™

FEATURES

FIND STUD CENTRE
FIND STUD EDGES
FIND WOOD OR METAL STUDS
SCAN THICKER WALLS
WIREWARNING® DETECTION
SCAN FOR METAL
LOCATE ELECTRICAL
LCD DISPLAY
LOW BATTERY INDICATOR
COLORTRIP™ DISPLAY

MultiScanner® HD900c OneStep™

MultiScanner® HD900c quickly and easily locates the centre and edges of wood and metal studs and joists behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights red, to alert the presence of live AC in Stud, DeepScan®, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® Detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep, and ferrous metal, such as rebar, up to 76 mm deep
  • AC Scan mode locates live, unshielded AC electrical wiring up to 51 mm deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • ColorTrip™ multicolor display with Target Spotlight indicates the direction and edge of the stud and illuminates when the centre of the stud is detected
  • Low battery Indicator for optimum performance
  • Signal Strength Indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
  • Translucent base and illuminated “V” marker groove for more accurate marking of target location

MultiScanner® HD900c quickly and easily locates the centre and edges of wood and metal studs and joists behind walls, floors, and ceilings. The advanced ColorTrip™ display lights green in stud scan, blue in metal, and red in live AC scan. Screen flashes, or lights red, to alert the presence of live AC in Stud, DeepScan®, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® Detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
Read More Read Less
Back To Top