MultiScanner™ A250 is an all-in-one tool complete with stud finding, metal detecting, and live AC scanning capabilities. Equipped with a 4-mode switch, the A250 is able to smoothly transition between scanning modes. This tool’s dedicated AC Scan Mode uses the backlit LCD screen to display bars indicating when the tool is moving towards the source of live AC voltage or away. The SpotLite™ Pointer, ultra-bright LCD screen, and audio tone indicate the location of the specified target.

• StudScan Mode locates the centre, edges, and direction of wood and metal studs up to 19 mm deep
• DeepScan™ Mode doubles the scanning depth to locate the centre, edges, and direction of wood and metal studs up to 38 mm
• Metal Scan Mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep, and ferrous metal, such as rebar, up to 75 mm deep
• AC Scan Mode locates live, unshielded AC electrical wiring up to 50 mm deep
• WireWarning™ Detection indicates the presence of live, unshielded AC electrical wiring up to 50 mm deep in stud and metal scanning modes
• ACT™ (Auto Correcting Technology) automatically and transparently recalibrates the MultiScanner™ when needed. ACT™ also corrects common errors, such as when scanning begins over a stud
• Low Battery Indicator alerts the user to replace the battery with a brand new battery with an extended expiration date for optimum performance
• Signal Strength Indicator helps to distinguish between shallow and deep targets
• SpotLite™ Pointer shines an arrow-shaped light on the scanned surface to clearly indicate the location of the target
• Translucent base and illuminated “V” marker groove provides more accurate marking of target location
• Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle