Back

MultiScanner® L350 OneStep™

FEATURES

FIND STUD CENTRE
FIND STUD EDGES
FIND WOOD OR METAL STUDS
SCAN THICKER WALLS
WIREWARNING® DETECTION
SCAN FOR METAL
LCD DISPLAY
LOW BATTERY INDICATOR

MultiScanner® L350 OneStep™

MultiScanner® L350 OneStep™ multifunction stud finder locates the centre, edges, and direction of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal targets up to 76 mm deep. A 3-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 38 mm deep, and ferrous metal, such as rebar, up to 76 mm deep
  • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud
  • Ultra-bright backlit LCD display indicates target location
  • Low battery indicator for optimum performance
  • Signal Strength indicator helps to distinguish between shallow and deep targets
  • SpotLite® Pointer shines an arrow-shaped light on the wall to clearly indicate the centre of the stud
  • “V” marker groove for more accurate marking of target location
  • Patented pivot pinch grip for a comfortable, secure hold in either hand, at any angle

MultiScanner® L350 OneStep™ multifunction stud finder locates the centre, edges, and direction of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal targets up to 76 mm deep. A 3-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite® Pointer, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the centre, edges, and direction of wood or metal studs up to 19 mm deep
  • DeepScan® mode doubles the scanning depth to 38 mm
  • WireWarning® detection indicates the presence of live, unshielded AC electrical wiring up to 51 mm deep in stud and metal scanning modes
  • Metal Scan mode…
Read More Read Less
Back To Top